Some of my favorite posts I've done are my DIY tutorials because they're a lot of fun for me to create and hopefully inspire some great creations from you. To be honest, I am still a complete novice with the sewing machine so I like easy, simple projects that require little sewing precision.
With Spring officially today, I am super excited to show you this simple summer swimsuit cover-up/wrap tutorial. Well, at least I hope it's simple for you! This is supposed to be an easy 20 min or so project but in all honesty it took me several hours! Don't laugh, I had some issues! The inspiration for this wrap came from another blog that it seemed very easy, and maybe it was for her but I had a hard time! Here's a few reasons why:
- my sewing machine was giving me every problem imaginable( it's vintage=moody)
- it took me quite awhile to adjust the fabric to have it fit right
- the finished product felt like it could fall right off my shoulders and wasn't comfortable for anyone chasing around little ones at the beach or pool
So, I made a few adjustments and I am very happy with my final product! Check it out:
Inspired by teaspoonsf.com
Here's What You Need:
- 1.75-2 yards of reversible or solid jersey fabric (makes 2 wraps depending on your body size and when choosing the color remember that your swimsuit gets wet so choose wisely)
- Sewing machine or needle and thread
- Tank top (optional)
Here's What to Do:
1) Lay your fabric out flat on a table or floor. Fold fabric in half and you'll have a rectangle. Cut the fabric along the fold to get two rectangular pieces. Set one aside to make 2nd wrap with.
2) Take your one rectangular piece and fold in half width wise. You'll have a folded side and a cut side.
3) Lay a tank top (I used an old one don't mind the condition:) on top of the cut end of the fabric to use as a guide for your arm cuts. Line it up on the edge and cut out the fabric. You can eye it as well if you prefer and just cut out a c shape from the corner.
4) Pin pieces of ribbon to the ends of the arm cuts you just made to create the shoulder straps. Try it on and adjust length and positioning of the ribbon straps and fabric as needed, to fit you best. I recommend wearing your swimsuit when you do this because bulky clothes can affect the way the fabric lays and how it fits.
That's where it was tricky for me. First I cut the ribbon too short and then it just took many, many times trying it on and adjusting, until I got it to fit decently. When you get it right, just sew the straps on.
Here's the final product-
Then you're all done! Unless......
You're like me and the wrap felt too loose or moments away from falling right off.
Take a look at the above photo , all the way to the right side where it shows the back. All I did is add two pieces of the same ribbon (right where the suit strap is) that I could tie together both side in the back like so-
Much better! The next one I make I'll cut them a bit longer so I can tie them myself a bit easier and in a cute bow in the back.
Now You're all done! It will be a summer staple, Enjoy! Hope it's easy for you to do!